Under-Extrusion & Missing Layers
Under-extrusion occurs when the 3D printer’s hotend fails to extrude the volume of molten filament specified by the slicer, resulting in thin, fragmented perimeters, porous top surfaces, hollow weak walls, and structural part failure.
Common Mechanical & Thermal Causes
Under-extrusion is typically caused by a partial nozzle clog, extruder drive gears slipping or chewing into filament, insufficient hotend temperature, printing faster than the hotend's volumetric melt capacity, or tangled filament spools.
Physical Diagnostics: Extruder Gear Clicking
When under-extrusion occurs under high resistance, the extruder stepper motor skips steps with an audible rhythmic "clicking" sound as the drive teeth grind against the stationary plastic.
Step-by-Step Fixes: Cold Pulls & Flow Checks
Resolving under-extrusion involves performing a nylon cold pull to clear internal nozzle debris, cleaning extruder gear teeth with a brass wire brush, increasing hotend printing temperature by 5°C–10°C, or bumping the slicer flow rate.
Calculate 3D Print Costs in Real Time
Estimate exact filament gram rates, machine hours, and profit margins for any MakerWorld design or 3MF/STL upload.
Calculate Now